Home     E-Flite Power 60 Brushless Outrunner Motor, 400Kv
E-Flite Power 60 Brushless Outrunner Motor, 400Kv

E-Flite Power 60 Brushless Outrunner Motor, 400Kv


E-Flite EFLM4060A


€ 109.95


Artikelcode: EFLM4060A

E-Flite Power 60 Brushless Outrunner Motor, 400Kv


  • Productinformatie

Key Features

Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
Ideal for models requiring up to 1700 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design—6mm shaft can easily be reversed for alternative motor installations
Slotted 14-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation
Needed To Complete

60A brushless ESC
5S–7S Li-Po or 16- to 24-cell Ni-MH/Ni-Cd
14x8 to 16x10 prop

Overview

The Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg), 46-size 3D airplanes up to 7 pounds (3.2 kg), or models requiring up to 1700 watts of power. It’s an especially good match for Hangar 9 .60-size warbirds like the Corsair 60 (HAN2575), P-47D Thunderbolt 60 (HAN2975), P-40 Warhawk 60 (HAN2850), P-51 Mustang 60 (HAN2375), P-51 Miss America 60 (HAN2775) and .46-size 3D planes such as the Hangar 9 Funtana 40 (HAN1975) or Seagull Harrier 46 (SEA3025).


Hangar 9 P-51 Miss America (HAN2775)

Motor: Power 60
ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)
APC 15x10E
Battery: Thunder Power PRO LITE 6000mAh 6S3P (THP60003S3PPL x2 in series)
Flying Weight w/Battery: 8.8 lb

Amps        Volts        Watts        Input Watts/Pound        RPM
56.0        21.3        1195        136        7375

Expect very strong performance with a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management.


Seagull Harrier 3D 46 (SEA3025)

Motor: Power 60
ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)
Prop: APC 16x8E
Battery: Thunder Power PRO LITE 4200mAh 6S2P (THP42003S2PPL x2 in series)
Flying Weight w/Battery: 6.4 lb

Amps        Volts        Watts        Input Watts/Pound        RPM
50.5        21.0        1060        165        6975

Expect very strong performance with unlimited vertical and plentiful power for hovering and 3D aerobatics. Average duration is approximately 8 to 15 minutes depending on throttle management

Specs

Application:        Airplane
Bearings or Bushings:        One 6 x 15 x 5mm bearing and Two 6 x 12 x 4mm Bearing
Cells:        16–24 Ni-MH/Ni-Cd or 5–7S Li-Po
Continuous Current:        51A +
Diameter:        50mm (2 in)
Idle Current (Io):        2.70A @ 10V
Length:        62mm (2.4 in)
Maximum Burst Current:        65A (15 sec)
Motor Design:        Outrunner
Overall Diameter:        50mm (2.00 in)
Overall Length:        62mm (2.40 in)
Power Plant Size :        60-110 Electric
RPM/Volt (Kv):        400
Recommended Prop Range:        14x8 to 16x10
Resistance (Ri):        .06 ohms
Shaft Diameter:        6mm (.24 in)
Size:        Replacement for 60-size glow engines
Speed Control:        60A brushless (EFLA1060)
Type:        Brushless outrunner
Voltage:        18.5 to 28.8
Weight:        380 g (13.0 oz)
Wire Gauge:        14