Home     Graupner Servo HVS 930 BB, MG13 mm 7965
Graupner Servo HVS 930 BB, MG13 mm 7965

Graupner Servo HVS 930 BB, MG13 mm 7965


Graupner 7965


€ 59.95


Artikelcode: GRP 7965

Graupner Servo HVS 930 BB, MG13 mm                      7965


  • Productinformatie

A new series of products to complement our existing range of digital servos.
These DES servos represent a product line which includes a suitable servo for every type of application, covering a vast range of specifications: different case sizes, gearbox types, torque levels and transit speeds, designed for any modeller from the beginner to the competition pilot.
The range includes some fully sealed versions (case screws, case sections and output gear) for increased operational reliability of your models.
Servos with precision-made twin-ballraced gearboxes made of aluminium and other metals guarantee superbly accurate positional performance. High-quality Amtel micro-controllers are used to process the control signals and provide good positional accuracy.
Suitable for RC model aircraft, helicopters, RC cars and model boats.

Do not use in carbon wings with RDS with electrical connection or aluminium levers. The gear/RDS or the aluminium levers must be electrically isolated! Potentiometer voltage is present on the gear.
High voltage, operating voltage up to 8.4 V!
Direct operation with 2-cell LiPo batteries
Operating voltage range 4.8 ... 8.4 V
Ball bearings
Metal gearbox

Technical information
Operating voltage neutral [V]:        4,8 ... 8,4
Width [mm]:        13
Brushless:        No
Angular travel incl. trim, approx.:        2 x 45
Replacement gearbox:        7965.2
Gear unit:        Metal
Weight [g]:        23
Holding torque 6.0V, approx. [Ncm]:        108
Holding torque 7.4V, approx. [Ncm]:        126
High-Voltage:        Yes
Height [mm]:        33
Bearings:        1 Ball-Bearing
Overall length [mm]:        30
No-load current drain, approx. [mA]:        17
Max. operating frequency [ms / Hz]:        3,0 / 333
Neutral impulse:        1,5
Servo type:        digital
Servo series:        HVS Servo
Torque at 6.0 V, approx. [Ncm]:        54
Torque at 7.4 V, approx. [Ncm]:        63
Transit speed at 6.0 V, approx. [Sek / 40°]:        0,11
Transit speed at 7.4 V, approx. [Sek / 40°]:        0,09
Charging rate at 6.0V approx. [mA]:        920
Charging rate of 7.4 V approx. [mA]:        1160